❤Mode 1: Anti-ageing.
The Anti-ageing mode has red LED light with a wavelength of 633 nm and near-infrared light with a wavelength of 830 nm. This mode provides a revitalizing experience for your skin. Red and near-infrared LED light may support skin’s natural collagen, helping to firm the skin, improve the look of skin texture, reduce the appearance of wrinkles and enhance overall appearance.

💙Mode 2: Target.
Blue LED light helps skin look clearer and smoother. Also suitable for people with blemish-prone skin.

🤍Mode 3: Recovery.
Near-infrared light is used as part of a cosmetic routine and may support skin’s natural collagen, for a revitalised look.

🩷Mode 4: Balance. The Balance mode is a combination of red LED light with a wavelength of 633 nm, blue LED light with a wavelength of 415 nm and near-infrared light with a wavelength of 830 nm. This mode may support skin’s natural collagen and is the perfect mode for an overall boost for the look of the skin and multiple cosmetic skincare concerns.

⭐ Helps visibly soften the look of fine lines and wrinkles
⭐ Helps enhance the appearance of skin smoothness
⭐ Personalised cosmetic routine
⭐ Convenient and portable
⭐ Time-efficient sessions
⭐ Suitable for most skin types; not for irritated, broken or photosensitive skin

⚡Red cosmetic LED light (633 nm)
⚡Blue cosmetic LED light (415 nm)
⚡near-infrared cosmetic LED light (830 nm)
⚡62 mW/cm² – 129 mW/cm² output
⚡44 J/cm² – 77 J/cm² energy delivery
⚡360 LEDs
⚡10-minute sessions
⚡4 customised cosmetic light settings
⚡Flexible silicone design
⚡Rechargeable
⚡Remote control to adjust settings
⚡Automatic timer
⚡User-friendly controls

Charging
🖤 Insert the USB-C cable (provided) into the port at the top of the remote. Attach to a USB-C friendly power source. The battery icon will show a loading sequence while charging. Charging time is approximately 4 hours 30 minutes for up to 6 uses. For best performance, use the provided charging cable.
🖤 If the controller fails to charge or turn on, a reset may be required. Press and hold both buttons for 20 seconds, then immediately begin charging the device. The battery icon should appear. Repeat if unsuccessful.

How to assemble
🖤 Remove all parts of the LED Face Mask from the packaging, including the remote, eye comfort pads, straps, and LED Face Mask.
🖤 Place the eye comfort pads into the eye openings and ensure they are securely attached. See ‘R’ for right and ‘L’ for left on the pads.
🖤 Attach the straps into the loops at the side of the LED Face Mask. Ensure the larger end of the strap is facing upward for a secure fit around the crown of your head.
🖤 Plug the wire from the LED Face Mask into the top of the remote. The mask will only operate when the remote is connected.

Using your mask
🖤 Once assembled, place the LED Face Mask onto your face and secure the straps around the crown of your head.
🖤 Long press the On/Off button on the remote to power on. The first cosmetic light setting will appear.
🖤 Short press the Mode button to move between the four cosmetic light settings:
• Smooth & Firm – Cosmetic red and near-infrared light for a firmer-looking, radiant appearance.
• Clarify – Cosmetic blue and near-infrared light to maintain a clearer-looking complexion.
• Calm & Restore – Cosmetic near-infrared with a touch of red for a comforted, refreshed appearance.
• Balance – Cosmetic red, blue, and near-infrared light for an even-looking skin tone.
🖤 Once you have chosen your preferred setting, enjoy a 10-minute cosmetic session.
🖤 To switch off the mask before the 10 minutes are complete, long press the On/Off button.
Cleaning
🖤 After each use, wipe down the area of the mask that has come into contact with your skin using a clean, cosmetic-safe wipe.

✅1 x STYLPRO Wavelength LED Face Mask
✅1 x USB-C Cable
✅2 x Silicone Eye Comfort Pads
✅2 x Adjustable Mask Straps